| Customization: | Available |
|---|---|
| Warranty: | 24months |
| Type Gun: | Manual or Auto Powder Coating Gun |
|
Still deciding? Get samples of US$ 960/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This is a highly cost-effective machine
There are four modes to choose from to meet most spraying needs
Special pulse mode can handle deep grooves
The gun shell is made of special anti-static material, with a service life of 4-5 times that of a regular spray gun
The display is consistent with the actual high voltage, achieve what you see is what you get
[ POWDER COATING GUN ]
[ POWDER HOPPER & TROLLEY ]
· Powder hopper adopts 304 stainless steel detachable way, easy to clean, long service life
· The fluidizing plate is made of PTFE material with low friction coefficient and resistance to organic solvents
· The chassis of the trolley is added with powder hopper anti-skid design
· Use silent wheel and universal wheel, easy to move, no stuck
| ELECTRICAL DATA GALIN ELECTROSTATIC POWDER COATING MACHINE (PHIRST) |
|
| Nominal input voltage | 110V/220V |
| Frequency | 50 - 60Hz |
| Connected load (without vibrator) | 140 VA |
| Nominal output voltage (to the gun) | eff.10 V |
| Nominal output current (to the gun) | max. 1.2 A |
| Connection and output for vibrator (on Aux output) | 110/230 VAC max. 100 W |
| Connection for rinsing function (valve) | 24 VDC max. 3 W |
| Temperature range | 0°C - +40°(+32°F - +104°F) |
| Max. surface temperature | 120 °C (+248 °F) |
| PNEUMATICAL DATA GALIN ELECTROSTATIC POWDER COATING MACHINE (PHIRST) |
|
| MAX.input pressure | 10bar / 145psi |
| MIN.input pressure | 6bar / 87psi |
| Max.water vapor content of the compressed air | 1.3g/Nm³ |
| Max.oil vapor content of the compressed air | 0.1mg/Nm³ |
| Max.compressed air consumption | 8Nm³/h |
| PROCESSIBLE POWDER GALIN ELECTROSTATIC POWDER COATING MACHINE (GalinK-1) |
|
| Epoxy Powder: | √ |
| PTFE Powder: | √ |
| Metal Powder: | √ |
| Enamel Powder: | × |
Galin Electrostatic powder coating machine can be used for Hub
| Error/cause | Troubleshooting |
| Injector nozzle, non-return valve unit, powder hose or powder gun are clogged |
Clean the corresponding parts and if necessary,replace them |
| Conveying vacuum too low | Increase the powder quantity and / or total air volume on the control unit |
| Insert sleeve worn , not or incorrect inserted |
Replace or insert it ,observe the indexing cam |
| Insert sleeve is worm after a short operating duration |
Clean the nozzle ,if damaged,replaced it |
| The gun does not spray powder although the control unit is switched on and the gun trigger is pressed |
1.Connect the machine to the compressed air 2.Clean /Replace 3.Clean the corresponding 4.Contact Galin representative |
){kind=link}