Galin Powder Spray/Painting/Coating Mother Board/Printed Circuit Board/PCB (TCL-K) with Powder Coating Gun (GLQ-L-1YC)

• Customization: Available
• Application Method: Electrostatic Spray
• Coating Material: Epoxy
• Model NO.: TCL-K
• Voltage: 110V, 220V
• Warranty: 12months
• Type Machine: Manual Powder Coating Machine
• Type Gun: Manual Powder Coating Gun
• Screen: Digital Display
• Type of Shipping: Express/Air Transport/Land Transpor/Ocean Shipping
• Delivery Detail: Shipped in 5 Days After Payment
• Type: Electrostatic Spraying Equipment
• Application: Metal and Glass Spraying Equipment
• Coating: Powder
• Certification: CE
• Method Type: Manual
• Condition: New
• After-Sales Service: Online
• Transport Package: Carton, High-Strength Cardboard
• Specification: Normal
• Trademark: Customized/Galin
• Origin: Shandong, China
• HS Code: 8424909000
• Production Capacity: 1000 Sets/Month
• Package Size: 10.00cm * 10.00cm * 15.00cm
• Package Gross Weight: 1.000kg

Product Description

Galin powder coating/spray/painting mother board/printed circuit board/
PCB (TCL-R )

it is suitable for all Galin powder coating gun 

 

GALIN POWDER COATING PCB OF MACHINE (TCL-R) ELECTRICAL DATA
Nominal input voltage	220V (100V-240VAC)
Frequency	50/60 Hz
Input power	40 VA
Rated output voltage(to gun)	12~18VPP
Rated output frequency(to gun)	About20KHZ
Protection type	IP54
Temperature rang	+10ºC to +40ºC (+50ºF to +104ºF)
Solenoid Valve Voltage	24VDC
Gun output voltage	0-100KVDC
Gun output current	0-100μA

 

ADVANTAGE OF POWDER COATING PCB (TCL-R)

Ideal for good coating grooves and corners.
It has three modes - FLAT MODE,CORNER MODE,RE-COAT MODE.
Powder ascending rate reach up to 65%~85% with long service life.
That is more convenient to operate after the selected mode.
 

APPLICATION AREA OF POWDER COATING PCB(TCL-R)

It has a wide range of applications, such as Hub,Rail,Cup,etc.
All METAL and GLASS can be coated with powder
All within your eyes can be coated by powder

Galin powder coating PCB(TCL-R) can be used for Hub
Galin powder coating PCB(TCL-R) can be used for Furnitur
Galin powder coating PCB(TCL-R) can be used for Metal Rail
Galin powder coating PCB(TCL-R) can be used for Metal products
Galin powder coating PCB(TCL-R) can be used for Glass products
Galin powder coating PCB(TCL-R) can be used for Metal or Glass Cup
Galin powder coating PCB(TCL-R) can be used for Any Metal or Glass you want
Galin Manual powder coating PCB(TCL-R) can be used for Grooves and Corners
Galin Manual powder coating PCB(TCL-R) can be used for Complex and Difficult Workpiece


 

ATTENTIONS OF POWDER COATING MACHINE AND PCB

CLEANING AND MAINTENANCE

Daily Maintenance
  1. Clean the injector
  2. Clean the powder gun
  3. Clean the powder hose and suction unit

Weekly Maintenance
  1. Clean suction unit,injector,Powder Clean module and powder gun
  2. Check the control unit grounding connections to the coating booth bolts,
     the suspension devices of the work pieces,or the conveyor.


TROUBLESHOOTING GUIDE

If the powder gun does not spray powder although the control unit is switched on,then the injector can be dirty or clogged.
 

Error/cause	Troubleshooting
Injector nozzle, non-return valve unit, powder hose or powder gun are clogged	Clean the corresponding parts and if necessary,replace them
Conveying vacuum too low	Increase the powder quantity and/ or total air volume on the control unit
Insert sleeve worn ,  not or incorrect inserted	Replace or insert it ,observe the indexing cam
Insert sleeve is worm after a short operating duration	Clean the nozzle ,if damaged,replaced it
The gun does not spray powder although the control unit  is switched on and the  gun trigger is pressed	1.Connect the equipment to the compressed air       2.Clean /Replace                                                 3.Clean the corresponding                               4.Contact Galin representative

 

Company Profile

 

Weifang Galin Powder Coating Equipment CO.,LTD 

We located in Shandong district,specializes in manufacturing the coating equipment .
We are a Chinese supplier and specialize in the research, development and production of the powder coating system and liquid painting system over 8 years with high quality and reasonable price.OEM order and customized design available.
 
Mainly products: Vibratory Box Feed Coating Machine, Fluidizing Hopper Coating Machine,Powder gun, high voltage cascade, PCB, Powder injector, Spray Nozzle, etc.
In addition,we can make all kinds of high voltage cascade, provide perfect substitutes for well-known brand spare parts.
 
We not only supply the high-quality coating equipment,but also the best service.
 
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.