Galin Powder Coating/Spray/Paint 24V Mother Board/Printed Circuit Board/PCB (801) for Powder Coating Machine

• Customization: Available
• Warranty: 12months
• Type Machine: Manual Powder Coating Machine
• Model NO.: 801
• Type Gun: Manual Powder Coating Gun
• Screen: Columnar Display
• Type of Shipping: Express/Air Transport/Land Transpor/Ocean Shipping
• Delivery Detail: Shipped in 10 Days After Payment
• Type: Electrostatic Spraying Equipment
• Application: Hardware Spraying Equipment, Metal and Glass Spraying Equipment
• Coating: Powder
• Certification: CE
• Method Type: Manual
• Condition: New
• After-sales Service: Online
• Transport Package: Carton, High-Strength Cardboard
• Specification: Normal
• Trademark: Customized/Galin
• Origin: Shandong, China
• HS Code: 8424909000
• Production Capacity: 1000 Sets/Month

Product Description

Galin powder coating/spray/paint mother board/printed circuit board/PCB (801)

 

GALIN POWDER COATING MACHINE (ESP101) ELECTRICAL DATA
Nominal input voltage	220V (100V-240VAC)
Frequency	50/60 Hz
Input power	50 VA
Rated output voltage	12~18VPP
Rated output current	1.2A
Protection type	IP54
Temperature rang	+10ºC to +40ºC (+50ºF to +104ºF)
Solenoid Valve Voltage	24VDC
Gun output voltage	0-100KVDC
Gun output current	0-100μA

                                    

GALIN POWDER COATING MACHINE (ESP101)  PNEUMATICAL DATA
MAX.input pressure	8bar
MIN.input pressure	5bar
Output pressure	0~8bar
Max.water vapor content of the compressed air	1.3g/m³
Max.oil vapor content of the compressed air	0.1mg/m³
Max.compressed air consumption	19Nm³/h

 

ADVANTAGE OF POWDER COATING PCB (101) OF MACHINE

Combines the advantages of imported circuit

the use of imported components, according to the environment and conditions were optimized:
Product small power consumption, stable and reliable performance, with automatic gain and warning devices, automatically adjust the electric field energy and has automatic protection function, for dead on the powder have an extremely high rate.










 

APPLICATION AREA OF POWDER COATING MACHIEN

Galin powder coating machine can be used for Hub
Galin powder coating machine can be used for Furnitur
Galin powder coating machine can be used for Metal Rail
Galin powder coating machine can be used for Metal products
Galin powder coating machine can be used for Glass products
Galin powder coating machine can be used for Metal or Glass Cup
Galin powder coating machine can be used for Any Metal or Glass you want
Galin powder coating machine (ESP101) can be used for Large and Flat piece
Galin Manual powder coating machine (ESP101) can be used for Mass Production

It has a wide range of applications, such as Hub,Rail,Cup,etc.
All METAL and GLASS can be coated with powder
All within your eyes can be coated by powder
 

ATTENTIONS OF POWDER COATING MACHINE

CLEANING AND MAINTENANCE

Daily Maintenance
  1. Clean the injector
  2. Clean the powder gun
  3. Clean the powder hose and suction unit
Weekly Maintenance
  1. Clean suction unit,injector,Powder Clean module and powder gun
  2. Check the control unit grounding connections to the coating booth bolts,
     the suspension devices of the work pieces,or the conveyor.


TROUBLESHOOTING GUIDE

If the powder gun does not spray powder although the control unit is switched on,then the injector can be dirty or clogged.
 

Error/cause	Troubleshooting
Injector nozzle, non-return valve unit, powder hose or powder gun are clogged	Clean the corresponding parts and if necessary,replace them
Conveying vacuum too low	Increase the powder quantity and/ or total air volume on the control unit
Insert sleeve worn ,  not or incorrect inserted	Replace or insert it ,observe the indexing cam
Insert sleeve is worm after a short operating duration	Clean the nozzle ,if damaged,replaced it
The gun does not spray powder although the control unit  is switched on and the  gun trigger is pressed	1.Connect the equipment to the compressed air       2.Clean /Replace                                                 3.Clean the corresponding                               4.Contact Galin representative

 

COMPANY INFORMATION OF GALIN

Weifang Galin Powder Coating Equipment CO.,LTD 

We located in Shandong district,specializes in manufacturing the coating equipment .
We are a Chinese supplier and specialize in the research, development and production of the powder coating system and liquid painting system over 8 years with high quality and reasonable price.OEM order and customized design available.
 
Mainly products: Vibratory Box Feed Coating Machine, Fluidizing Hopper Coating Machine,Powder gun, high voltage cascade, PCB, Powder injector, Spray Nozzle, etc.
In addition,we can make all kinds of high voltage cascade, provide perfect substitutes for well-known brand spare parts. 
We not only supply the high-quality coating equipment,but also the best service.
 
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.