Galin/Gemas Metal/Plastic Powder Coating/Spray/Paint Mother Board/PCB Cg06 Cg07 Mainboard 1000 875 for Gemas Optiflex F

• Customization: Available
• Warranty: 1 Year
• Type Gun: Manual or Auto Powder Coating Gun
• Model NO.: 1000 875
• Screen: LED
• Type of Shipping: Express/Air Transport/Land Transpor/Ocean Shipping
• Delivery Detail: Shipped in 5 Days After Payment
• Match Machine: Gemas Optiflex Series
• Type: Electrostatic Spraying Equipment
• Application: Hardware Spraying Equipment, Metal and Glass Spraying Equipment
• Coating: Powder
• Certification: CE, ISO
• Method Type: Manual
• Condition: New
• After-sales Service: Online
• Transport Package: Carton, High-Strength Cardboard
• Specification: Normal
• Trademark: Customized/Galin/Gema
• Origin: Shandong, China
• HS Code: 8424909000
• Production Capacity: 100 Sets/Month

Product Description

Galin/Gemas  Powder Coating PCB (CG07/CG06)
for Gema OptiFlex F

CG07 PCB spare parts
CG07 Gun control unit - complete	1001 060
Front plate - complete	1000 395
1 Front plate with foil keyboard	1000 394
2 Front shield - complete	1000 528
3 OptiStar mainboard V1.0    - complete, with display	1000 875
4 Locknut - M3	262 498
5 Washer - Ø 3,2/7x0,5 mm	201 944
6 Standoff - Ø 3,2/6x6 mm	1001 925
7 Standoff - Ø 3,2/6x15 mm	1001 926
8 Compression spring    - 0,5x6,3x13,5 mm	230 251
9 Special screw	1000 400

 PCB CG07 CG06 electrical data

Nominal input voltage	110V240VAC
Frequency	50-60Hz
Connected load (without vibrator)	140 VA
Nominal output voltage (to the gun)	eff.10 V
Nominal output current (to the gun)	max. 1.2 A
Connection and output for vibrator (on Aux output)	110/230 VAC max. 100 W
Connection for rinsing function (valve)	24 VDC max. 3 W
Temperature range	0°C - +40° (+32°F - +104°F)
Max. surface temperature	120 °C (+248 °F)
Approvals	II 3 D IP54 120 °C

PCB CG07 CG06 Pneumatical data

MAX.input pressure	10bar/145psi
MIN.input pressure	6bar/87psi
Max.water vapor content of the compressed air	1.3g/Nm³
Max.oil vapor content of the compressed air	0.1mg/Nm³
Max.compressed air consumption	8Nm³/h

 IT CAN BE CHANGED WITH ORIGINAL GEMAS OPTIFLEX F 
 

GALIN POWDER COATING PCB (CG07 / CG06) PROCESSIBLE POWDER
Plastic Powder:	√
Metallic Powder:	√
Enamel Powder:	×

 

Galin powder coating PCB can be used for Hub
Galin powder coating PCB can be used for Furnitur
Galin powder coating PCB can be used for Metal Rail
Galin powder coating PCB can be used for Metal products
Galin powder coating PCB can be used for Glass products
Galin powder coating PCB can be used for Metal or Glass Cup
Galin powder coating PCB can be used for Any Metal or Glass you want

Galin Matel/Plastic powder coating PCB (CG07) can be used for Metal Powder

Galin Matel/Plastic powder coating PCB (CG07) can be used for  Complex Piece

CLEANING AND MAINTENANCE OF POWDER COATING MACHINE
(OPTFLEX-F)

1. Daily Maintenance

  1. Clean the injector
  2. Clean the powder gun
  3. Clean the powder hose and suction unit

1. Weekly Maintenance

  1. Clean suction unit,injector,Powder Clean module and powder gun
  2. Check the control unit grounding connections to the coating booth bolts,
     the suspension devices of the work pieces,or the conveyor.


TROUBLESHOOTING GUIDE OF POWDER COATING MACHINE(OPTFLEX-F)

If the powder gun does not spray powder although the control unit is switched on,then the injector can be dirty or clogged.
 

Error/cause	Troubleshooting
Injector nozzle, non-return valve unit, powder hose or powder gun are clogged	Clean the corresponding parts and if necessary,replace them
Conveying vacuum too low	Increase the powder quantity and/ or total air volume on the control unit
Insert sleeve worn ,  not or incorrect inserted	Replace or insert it ,observe the indexing cam
Insert sleeve is worm after a short operating duration	Clean the nozzle ,if damaged,replaced it
The gun does not spray powder although the control unit  is switched on and the  gun trigger is pressed	1.Connect the machine to the compressed air    2.Clean /Replace                                             3.Clean the corresponding                               4.Contact Galin representative