After-sales Service: | Online |
---|---|
Warranty: | 12months |
Type: | Electrostatic Spraying Equipment |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Galin powder coating/spray/paint mother board/ printed circuit board/PCB (TCL-R ) |
it is suitable for all Galin powder coating gun |
GALIN POWDER COATING PCB OF MACHINE (TCL-R) ELECTRICAL DATA | |
Nominal input voltage | 220V (100V-240VAC) |
Frequency | 50/60 Hz |
Input power | 40 VA |
Rated output voltage(to gun) | 12~18VPP |
Rated output frequency(to gun) | About20KHZ |
Protection type | IP54 |
Temperature rang | +10ºC to +40ºC (+50ºF to +104ºF) |
Solenoid Valve Voltage | 24VDC |
Gun output voltage | 0-100KVDC |
Gun output current | 0-100μA |
ADVANTAGE OF POWDER COATING PCB (TCL-R) |
APPLICATION AREA OF POWDER COATING PCB(TCL-R) |
ATTENTIONS OF POWDER COATING MACHINE AND PCB |
Error/cause | Troubleshooting |
Injector nozzle, non-return valve unit, powder hose or powder gun are clogged |
Clean the corresponding parts and if necessary,replace them |
Conveying vacuum too low | Increase the powder quantity and/ or total air volume on the control unit |
Insert sleeve worn , not or incorrect inserted |
Replace or insert it ,observe the indexing cam |
Insert sleeve is worm after a short operating duration |
Clean the nozzle ,if damaged,replaced it |
The gun does not spray powder although the control unit is switched on and the gun trigger is pressed |
1.Connect the equipment to the compressed air 2.Clean /Replace 3.Clean the corresponding 4.Contact Galin representative |
COMPANY INFORMATION OF GALIN |
Suppliers with verified business licenses