Hot Selling / Cheaper / Lighting Manual Powder Coating / Spraying Machine Galindc-04

• Customization: Available
• Warranty: 18months
• Type Machine: Manual Powder Coating
• Model NO.: DC04
• with Gun: Manual Powder Coating Gun
• Screen: Digital Display
• Hopper: 50L
• Type of Shipping: Express/Air Transport/Land Transpor/Ocean Shipping
• Delivery Detail: Shipped in 7 Days After Payment
• Weight: Only 25kg
• Assembled: All Pieces Can Be Disassembled
• MOQ: 1 Set
• Color: Green & Black
• Parameter Set: Current and Voltage Can Be Set Separately
• Cleaning Air: Non
• Gun Color: Grey
• Cable Length: 4m
• Dynamic Air Input: No Less Than 6bar
• Type: Electrostatic Spraying Equipment
• Application: Hardware Spraying Equipment, Metal and Glass Spraying Equipment
• Coating: Powder
• Certification: CE, ISO
• Method Type: Manual
• Condition: New
• After-sales Service: Online
• Transport Package: Carton, High-Strength Cardboard
• Specification: Normal
• Trademark: Customized/Galin
• Origin: Shandong, China
• HS Code: 84243000
• Production Capacity: 100 Sets/Month
• Package Size: 45.00cm * 45.00cm * 60.00cm
• Package Gross Weight: 30.000kg

Product Description

Hot selling / cheaper / lighting manual powder coating / spraying machine GalinDC-04

 

GALIN POWDER COATING EQUIPMENT (DC04) ELECTRICAL DATA
Nominal input voltage	100V-240VAC
Frequency	50/60 Hz
Input power	40 VA
Rated output voltage(to gun)	12~18VPP
Rated output frequency(to gun)	About20KHZ
Protection type	IP54
Temperature rang	+10ºC to +40ºC (+50ºF to +104ºF)
Solenoid Valve Voltage	24VDC
Gun output voltage	0-100KVDC
Gun output current	0-100μA

GALIN POWDER COATING EQUIPMENT (DC04)  PNEUMATICAL DATA
MAX.input pressure	8bar
MIN.input pressure	5bar
Output pressure	0~8bar
Max.water vapor content of the compressed air	1.3g/m³
Max.oil vapor content of the compressed air	0.1mg/m³
Max.compressed air consumption	19Nm³/h

GALIN POWDER COATING EQUIPMENT (DC04) GUN PARAMETER
Input	12~18VPP
Voltage Frequency	Around 22KHZ
Input Current	<0.5A
Output Voltage	15~100KV Negative
Max.Output powder volume	Around 600G/MIN
Gun cable	4 M
Gun weight	425g

Galin powder coating Equipment can be used for Hub
Galin powder coating Equipment can be used for Furnitur
Galin powder coating Equipment can be used for Metal Rail
Galin powder coating Equipment can be used for Metal products
Galin powder coating Equipment can be used for Glass products
Galin powder coating Equipment can be used for Metal or Glass Cup
Galin powder coating Equipment can be used for Any Metal or Glass you want
Galin Manual powder coating Equipment (TCL-3) can be used for Grooves and Corners
Galin Manual powder coating Equipment (TCL-3) can be used for Complex and Difficult Workpiece

CLEANING AND MAINTENANCE

1. Daily Maintenance

  1. Clean the injector
  2. Clean the powder gun
  3. Clean the powder hose and suction unit

1. Weekly Maintenance

  1. Clean suction unit,injector,Powder Clean module and powder gun
  2. Check the control unit grounding connections to the coating booth bolts,
     the suspension devices of the work pieces,or the conveyor.


TROUBLESHOOTING GUIDE

If the powder gun does not spray powder although the control unit is switched on,then the injector can be dirty or clogged.
 

Error/cause	Troubleshooting
Injector nozzle, non-return valve unit, powder hose or powder gun are clogged	Clean the corresponding parts and if necessary,replace them
Conveying vacuum too low	Increase the powder quantity and/ or total air volume on the control unit
Insert sleeve worn ,  not or incorrect inserted	Replace or insert it ,observe the indexing cam
Insert sleeve is worm after a short operating duration	Clean the nozzle ,if damaged,replaced it
The gun does not spray powder although the control unit  is switched on and the  gun trigger is pressed	1.Connect the equipment to the compressed air 2.Clean /Replace                                             3.Clean the corresponding                               4.Contact Galin representative