| Customization: | Available |
|---|---|
| Warranty: | 12months |
| Type Machine: | Manual Powder Coating |
|
Still deciding? Get samples of US$ 660/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| GALIN POWDER COATING MACHINE (TCL-3) ELECTRICAL DATA | |
| Nominal input voltage | 220V (100V-240VAC) |
| Frequency | 50/60 Hz |
| Input power | 40 VA |
| Rated output voltage(to gun) | 12~18VPP |
| Rated output frequency(to gun) | About20KHZ |
| Protection type | IP54 |
| Temperature rang | +10ºC to +40ºC (+50ºF to +104ºF) |
| Solenoid Valve Voltage | 24VDC |
| Gun output voltage | 0-100KVDC |
| Gun output current | 0-100μA |
| GALIN POWDER COATING MACHINE (TCL-3) PNEUMATICAL DATA | |
| MAX.input pressure | 8bar |
| MIN.input pressure | 5bar |
| Output pressure | 0~8bar |
| Max.water vapor content ofthe compressed air | 1.3g/m³ |
| Max.oil vapor content of the compressed air | 0.1mg/m³ |
| Max.compressed air consumption | 19Nm³/h |
| GALIN POWDER COATING MACHINE (TCL-3) GUN PARAMETER | |
| All the guns in the pictures match the Galin TCL-3 | |
| Input | 12~18VPP |
| Voltage Frequency | Around 22KHZ |
| Input Current | <0.5A |
| Output Voltage | 15~100KV Negative |
| Max.Output powder volume | Around 600G/MIN |
| Gun cable | 4 M |
| Gun weight | 425g |
| Error/cause | Troubleshooting |
| Injector nozzle, non-return valve unit, powder hose or powder gun are clogged |
Clean the corresponding parts and if necessary,replace them |
| Conveying vacuum too low | Increase the powder quantity and/ or total air volume on the control unit |
| Insert sleeve worn , not or incorrect inserted |
Replace or insert it ,observe the indexing cam |
| Insert sleeve is worm after a short operating duration |
Clean the nozzle ,if damaged,replaced it |
| The gun does not spray powder although the control unit is switched on and the gun trigger is pressed |
1.Connect the equipment to the compressed air 2.Clean /Replace 3.Clean the corresponding 4.Contact Galin representative |
Q: Can you provide the whole workshop automotive equipment?
A: Yes, we can provide every equipment that needed.
Q: Can I have a visit to your company before placing an order?
A: Sure, welcome to visit us. Our factory locates in Nantong, Jiangsu Province.
Q: Do you offer samples?
A: You can take 1-3 inserts or nozzles in first order for testing.
Q: What kind of support can I get if I am your agent?
A: Bottom price, free catalogs and unique customization for marketing, and on site training.
Q: What's the lead time?
A: The lead time of our products is 2 ~10 days, depending on how many and what kind of equipment you ordered.
Q: What is your payment terms?
A: We can accept T/T, L/C, Paypal, Western union, Moneygram,etc.
Q: How long is the warranty?
A: Our warranty is 12 months.
Q: Can I order special color or special size that we need?
A: Yes, the color and size can be customized as client's requests ,but some have quantity requirement.
Q: Can I know how to assemble your spray booth or other equipment?
A: Mostly the complex installation is already finished before delivery, you can easily finish the last according to the installation instructions.And we also can send the assemble vedio to you for your reference.
[ COMPANY INFORMATION OF GALIN ]
){kind=link}