| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Type Gun: | Manual or Auto Powder Coating Gun |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| GALIN POWDER COATING MACHINE (OptiFlex-2) ELECTRICAL DATA | |
| Nominal input voltage | 110V240VAC |
| Frequency | 50-60Hz |
| Connected load (without vibrator) | 140 VA |
| Nominal output voltage (to the gun) | eff.10 V |
| Nominal output current (to the gun) | max. 1.2 A |
| Connection and output for vibrator (on Aux output) | 110/230 VAC max. 100 W |
| Connection for rinsing function (valve) | 24 VDC max. 3 W |
| Temperature range | 0°C - +40°(+32°F - +104°F) |
| Max. surface temperature | 120 °C (+248 °F) |
| Approvals | II 3 D IP54 120 °C |
| GALIN POWDER COATING MACHINE (OptiFlex-2)Pneumatical data | |
| MAX.input pressure | 10bar |
| MIN.input pressure | 6bar |
| Input pressure (Dynamic based on pressure regulator setting) |
5.5 bar / 80 psi |
| Max.water vapor content of the compressed air | 1.3g/Nm³ |
| Max.oil vapor content of the compressed air | 0.1mg/Nm³ |
| Max.compressed air consumption | 8Nm³/h |
| GALIN POWDER COATING MACHINE (OPTFlex-2) Processible powder |
|
| Plastic Powder: | √ |
| Metallic Powder: | √ |
| Enamel Powder: | × |
| [ APPLICATION AREA ] |
|
Galin powder coating machine can be used for Hub Galin powder coating machine can be used for Furnitur Galin powder coating machine can be used for Metal Rail Galin powder coating machine can be used for Metal products Galin powder coating machine can be used for Glass products Galin powder coating machine can be used for Metal or Glass Cup Galin powder coating machine can be used for Any Metal or Glass you want
Galin powder coating machine (OPTFlex-2) control unit can be used with Original Gema GM03 gun
Galin powder coating machine (OPTFlex-2) control unit can be used for Colorful and Complex Piece
|
| Error/cause | Troubleshooting |
| Injector nozzle, non-return valve unit, powder hose or powder gun are clogged |
Clean the corresponding parts and if necessary,replace them |
| Conveying vacuum too low | Increase the powder quantity and/ or total air volume on the control unit |
| Insert sleeve worn , not or incorrect inserted |
Replace or insert it ,observe the indexing cam |
| Insert sleeve is worm after a short operating duration |
Clean the nozzle ,if damaged,replaced it |
| The gun does not spray powder although the control unit is switched on and the gun trigger is pressed |
1.Connect the machine to the compressed air 2.Clean /Replace 3.Clean the corresponding 4.Contact Galin representative |
){kind=link}