Galin/Gemaa Powder Coating/Spray/Paint Machine (Optiflex - 2) Control Unit / Controller Cg09 Cg13 1007 018 1009 971

• After-sales Service: Online
• Warranty: 1 Year
• Type: Electrostatic Spraying Equipment
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: CG09 /CG13
• Application: Hardware Spraying Equipment, Metal and Glass Spraying Equipment
• Coating: Powder
• Certification: CE
• Method Type: Manual
• Condition: New
• Type Gun: Manual or Auto Powder Coating Gun
• Screen: LCD
• Type of Shipping: Express/Air Transport/Land Transpor/Ocean Shipping
• Delivery Detail: Shipped in 7 Days After Payment
• Package: Carton
• Transport Package: Carton, High-Strength Cardboard
• Specification: Normal
• Trademark: Customized/Galin/Gema
• Origin: Shandong, China
• HS Code: 8424909000
• Production Capacity: 100 Sets/Month

Product Description

Galin/Gemaa Powder Coating/Spray/Paint Machine (Optiflex - 2) for control unit combination

 

GALIN POWDER COATING MACHINE (OptiFlex-2) ELECTRICAL DATA
Nominal input voltage	110V240VAC
Frequency	50-60Hz
Connected load (without vibrator)	140 VA
Nominal output voltage (to the gun)	eff.10 V
Nominal output current (to the gun)	max. 1.2 A
Connection and output for vibrator (on Aux output)	110/230 VAC max. 100 W
Connection for rinsing function (valve)	24 VDC max. 3 W
Temperature range	0°C - +40°(+32°F - +104°F)
Max. surface temperature	120 °C (+248 °F)
Approvals	II 3 D IP54 120 °C

GALIN POWDER COATING MACHINE (OptiFlex-2)Pneumatical data
MAX.input pressure	10bar
MIN.input pressure	6bar
Input pressure (Dynamic based on pressure regulator setting)	5.5 bar / 80 psi
Max.water vapor content of the compressed air	1.3g/Nm³
Max.oil vapor content of the compressed air	0.1mg/Nm³
Max.compressed air consumption	8Nm³/h

 

  CONTROL UNIT COMBINATION  

GALIN POWDER COATING MACHINE (OPTFlex-2) Processible powder
Plastic Powder:	√
Metallic Powder:	√
Enamel Powder:	×

[   APPLICATION AREA   ]

Galin powder coating machine can be used for Hub
Galin powder coating machine can be used for Furnitur
Galin powder coating machine can be used for Metal Rail
Galin powder coating machine can be used for Metal products
Galin powder coating machine can be used for Glass products
Galin powder coating machine can be used for Metal or Glass Cup
Galin powder coating machine can be used for Any Metal or Glass you want

Galin powder coating machine (OPTFlex-2) control unit can be used with Original Gema GM03 gun

Galin powder coating machine (OPTFlex-2) control unit can be used for Colorful and Complex Piece
 

 

CLEANING AND MAINTENANCE OF POWDER COATING MACHINE
(OPTFLEX-2)

1. Daily Maintenance

  1. Clean the injector
  2. Clean the powder gun
  3. Clean the powder hose and suction unit

1. Weekly Maintenance

  1. Clean suction unit,injector,Powder Clean module and powder gun
  2. Check the control unit grounding connections to the coating booth bolts,
     the suspension devices of the work pieces,or the conveyor.


TROUBLESHOOTING GUIDE OF POWDER COATING MACHINE(OPTFLEX-2)

If the powder gun does not spray powder although the control unit is switched on,then the injector can be dirty or clogged.
 

Error/cause	Troubleshooting
Injector nozzle, non-return valve unit, powder hose or powder gun are clogged	Clean the corresponding parts and if necessary,replace them
Conveying vacuum too low	Increase the powder quantity and/ or total air volume on the control unit
Insert sleeve worn ,  not or incorrect inserted	Replace or insert it ,observe the indexing cam
Insert sleeve is worm after a short operating duration	Clean the nozzle ,if damaged,replaced it
The gun does not spray powder although the control unit  is switched on and the  gun trigger is pressed	1.Connect the machine to the compressed air    2.Clean /Replace                                             3.Clean the corresponding                               4.Contact Galin representative