Cema Optiflow IG07powder Coating Pump 1015 100
< IG07 INJECTOR SPARE PARTS >
| |
OptiFlow IG07 Powder injector - complete (pos. 1-15) |
1015 100 |
| A |
Conveying air check valve unit (red marking) - complete (incl. pos. 6, 8, 9 and 10) |
1015 830 |
| B |
Supplementary air check valve unit (black marking) - complete (incl. pos. 7, 8, 9 and 11) |
1015 831 |
| 1 |
Injector body - without pos. 14 and 15 |
1015 102 |
| 2 |
Slide gate |
1015 104 |
| 3 |
Release trigger |
1014 810 |
| 4 |
Screw - M3x6 mm |
1014 812 |
| 5 |
Compression spring |
1014 813 |
| 6 |
Connector (conveying air) - NW 5.5 |
1004 366 |
| 7 |
Connector (supplementary air) - NW 5.5 |
1004 367 |
| 8 |
O-ring - Ø 11x1.5 mm |
1000 532 |
| 9 |
Filter element |
1015 832 |
| 10 |
Body (red) |
1015 835 |
| 11 |
Body (black) |
1015 836 |
| 12 |
Cartridge - complete |
1016 561# |
| 13 |
Hose connection - complete (incl. pos. 13.1) |
1014 806 |
| 13.1 |
O-ring - Ø 13x1.5 mm |
1023 234# |
| 14 |
O-ring - Ø 16x2 mm |
1007 794# |
| 15 |
Axial gasket - complete |
1014 814 |
| |
|
|
| 21 |
Conveying air hose - Ø 8/6 mm (red) |
103 500* |
| 22 |
Supplementary air hose - Ø 8/6 mm (black) |
1008 038* |
| 23 |
Quick release coupling for conveying air hose - NW5-Ø 8 mm |
261 645 |
| 24 |
Quick release coupling for supplementary air hose - NW5-Ø 8 mm |
261 637 |
| 25 |
Kink protection |
1008 844 |
| |
Powder hose - 66 type, POE, Ø 16/11 mm, with conductive strip (standard) |
105 139*# |
| |
Powder hose - 74 type, POE, Ø 15/10 mm, with conductive strip |
1001 673*# |
| |
Powder hose - 75 type, POE, Ø 18/12 mm, with conductive strip |
1001 674*# |
1.Its output of powder is bigger than that pf existing injector.
2.Powder can easily penetrate every corner during powder coating.
3.Injector pump produces high quality coatings
4.Worker can easily control the spray pattern of powder.
< PRODUCT DETAILS>
<How to Clean Powder Injector/ Cleaning and Daily Maintence?>
Cleaning intensity depends of the powder used. For optimal cleaning results, we recommend dismantling the entire injector into its dismantable components.
1.Remove the injector
2.Remove the powder hose from the hose connection
3.Clean the hose connection with compressed air which is free of oil and water, and check for wear
4.Clean the injector body with compressed air which is free of oil and water. - Any contamination can be seen through the opening of the hopper fitting
5.If the injector is severely fouled, it must be dismantled
| ATTENTION |
Injector parts may be damaged during the cleaning process.
- Clean the component parts with compressed air and, if necessary, dissolve sintered deposits with nitro-thinner.
- Do not use acetone, do not scrape!
|
<Packing and delivery>
1.Packing : Carton
2.Delivery time : 4-9 days after received payment .
<FAQ>
Q1:How long your delivery time?
Generally 2-7 workdays after payment
Q2:What is your term of payment?
Multiple ,We can discuss each other .Such as paypal, T/T, L/C etc.
Q3:What is your pre-sales service?
*Enquiry and cousulting support.
*Technology solution and quotation
*Customer visit our company and check our production .
Q4:Where is your company? Can visit?
Yes.of course .We are located in Huixiandasha,Jiankang,Street Gaoxin District .Weifang City ,Shangdong Province China
Q5:Could you provide the design for me?
Absolutly .We would like to provide the design for my customer. Just let me know product information and your requirements like produci size ,picture materia and output field etc. We will make a layout according your requirements.
<Our Company>
Weifang Galin Powder Coating Equipment CO.,LTD which located in Shandong district,specializes in manufacturing the coating equipment .We are a typical Chinese supplier and specialized in the research, development and production of the powder coating system and liquid painting system. Our products includes booth, hopper,powder coating machine/unit,electrostatic spray gun ,panel controller,HV module,PCB board, injector/pump ,powder hose,filter and other parts and so on.In addition,we can make all kinds of high voltage module.
<Our Service>
WeiFang Galin Powder Coating Equipment CO.,LTD specializedin electrostatic powder coating equipment .
We can supply the best quality and sevice .
Technoligy consult Service.
One year warranty Service.
After market Service.
OEM Sevice
Hopes to work together with you in the near future.
<Relate Product>
<Application Product>
1. Cema Optiflow Ig07powder Coating Pump OptiFlow IG07 Powder Injector for metal surface.
2. Cema Optiflow Ig07powder Coating Pump OptiFlow IG07 Powder Injector for metal surface.
2. Cema Optiflow Ig07powder Coating Pump OptiFlow IG07 Powder Injector for car wheel.
3. Cema Optiflow Ig07powder Coating Pump OptiFlow IG07 Powder Injector for bicycle frame
4. Cema Optiflow Ig07powder Coating Pump OptiFlow IG07 Powder Injector for Shelf
5 .Cema Optiflow Ig07powder Coating Pump OptiFlow IG07 Powder Injector for Electrical Household Appliances.
6. Cema Optiflow Ig07powder Coating Pump OptiFlow IG07 Powder Injector for Aerospace Area
7. Cema Optiflow Ig07powder Coating Pump OptiFlow IG07 Powder Injector for Fitness Equipment
8. Cema Optiflow Ig07powder Coating Pump OptiFlow IG07 Powder Injector for Track Traffic
9. Cema Optiflow Ig07powder Coating Pump OptiFlow IG07 Powder Injector for Medical Devices
Audited Supplier 
){kind=link}
){kind=link}