Galin Manual Optiflex F Powder Coating/Spray/Painting Equipment and Machine
1. Control Unit
1.This PCB of this control unit can store more than 23 models, for example: Flat, Corner and Recoat. With it you can easily and precisely control all the pneumatic and electrostatic parameters of GalinFlex powder coating machine
2.DVC technology provide precise and repeatable regulations of conveying and supplementary air to achieve stable powder output and good coating results
3.Easy to use even for beginners
4.Powerful and flexible for specialists
2. Manual Spray Gun
1.Powder charge rate 85-95%, can save powder very much.
2.There is one remote control behind the gun, you can do the following things:
(1)adapt powder output (The powder output is correspondingly increased or reduced) - factory setting
(2)Program change (It is switching between programs P01-P20)
(3.)Activate/stop PowerClean process (injector, powder house and guns are rinsed)
3. Powder Injector
1.The OptiFlow injector is used for conveying normal organic powders between the powder hopper and the powder gun.
2.The injector is supplied with a PTFE insert sleeve as standard.
3.The OptiFlow Injector is a plug-in type and permits easy handling and quick cleaning. All connections are plug-in types and not interchangeable.
4.The injector can be disassembled without special tools.
Technical data
Electrical data
| Nominal input voltage |
100-240 VAC |
| Frequency |
50 - 60 Hz |
| Connected load (without vibrator) |
40 VA |
| Nominal output voltage (to the gun) |
eff.10 V |
| Nominal output current (to the gun) |
max. 1.2 A |
| Connection for rinsing function (valve) |
24 VDC (max. 3W) |
| Temperature range |
0°C - + 40°C (+32°F-+104°F) |
| Max. surface temperature |
100°C (+212 °F) |
Pneumatic data
| Max. input pressure |
10 bar |
| Min. input pressure |
6 bar |
Input pressure (Dynamic based on pressure
regulator setting) |
5.5 bar / 80 psi |
Max. water vapor content of the compressed
air |
1.3 g/m³ |
| Max. oil vapor content of the compressed air |
0.1 mg/m³ |
| Max. compressed air consumption |
11 Nm³/h |
Scope of delivery
| 1. |
GalinStar CG13 Control unit in a metal case with power supply cable |
| 2. |
mobile trolley with a gun/hose support |
| 3. |
plug-in GalinFlow injector |
| 4. |
GalinFlex 2 GM03 manual powder gun with gun cable, powder hose, rinsing air hose and standard nozzle set |
| 5. |
Pneumatic hoses for conveying air (red), supplementary air (black), fluidizing air (black) and rinsing air (black) |
| 6. |
Operating manual |
| 7. |
Short instructions |
| 8. |
vibrating base and a fluidizing/suction unit |
Application
The powder coating machine can used for the powder coating plant and line, for example:
Galin Manual Optiflex F Powder Coating/Spray/Painting Equipment and Machine can used to spray wheels
Galin Manual Optiflex F Powder Coating/Spray/Painting Equipment and Machine can used to spray steel door
Galin Manual Optiflex F Powder Coating/Spray/Painting Equipment and Machine can used to spray pipeline
Galin Manual Optiflex F Powder Coating/Spray/Painting Equipment and Machine can used to spray aluminum window
Galin Manual Optiflex F Powder Coating/Spray/Painting Equipment and Machine can used to spray metal
Galin Manual Optiflex F Powder Coating/Spray/Painting Equipment and Machine can used to spray bike
Galin Manual Optiflex F Powder Coating/Spray/Painting Equipment and Machine can used to spray car
Package And Shipping
Wooden box/Carton box, High-strength cardboard package or meet customer's requirement.
Our Company
Main Product:
booth, hopper, powder coating machine/unit, electrostatic spray gun, panel controller, cascade, PCB board, injector/pump, powder hose, filter and other parts and so on.
Our Service
Technology consult service
One year warranty service
After market service
OEM service
Relate product
Audited Supplier 
){kind=link}
){kind=link}