| After-sales Service: | Online |
|---|---|
| Warranty: | 12months |
| Type: | Coating Spray Gun |
| Samples: |
as pic shown
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier The Nordson Tribomatic II automatic powder spray gun
uses friction (the tribo effect) to electrostatically charge powder coating particles as they are forced through the spray gun by compressed air. The spray gun is used with a Tribomatic II controller and powder pump.
Available for PTFE powder spraying.
Added anti-static and wear-resistant materials, greatly extending the service life while ensuring high voltage without loss
| No. | Code | Part Name | Available or not |
| / | 631201 | Charge module ball mount PTFE | √ |
| 1 | 631225 | EXTENSION, complete | √ |
| 2 | 631221 | SLEEVE, wear, outlet, assembly, PTFE | √ |
| 3 | 940224 | O-RING, silicone, 1.000 x 1.125 x 0.063 in. | √ |
| 4 | 631222 | SPRING, silicone, 1.25 x 1.50 in. | √ |
| 5 | / | SLEEVE, wear, outlet, PTFE | √ |
| 6 | 631220 | RING, spacing | √ |
| 7 | 631212 | SLEEVE, wear, outer, PTFE | √ |
| 8 | 940284 | O-RING, silicone, 1.375 x 1.500 x 0.063 in. | √ |
| 9 | 631224 | DISTRIBUTOR, outlet, PTFE | √ |
| 10 | 631237 | PLUG, distributor, outlet, Tivar | √ |
| 11 | 940066 | O-RING, silicone, 0.125 x 0.250 x 0.063 in. | √ |
| 12 | 631236 | DISTRIBUTOR, outlet, PTFE | √ |
| 13 | 631216 | SLEEVE, wear, inner, PTFE | √ |
| 14 | 631210 | RING, positioning | √ |
| 15 | 631211 | STUD, M8 x 9.65 long | √ |
| 16 | 631234 | DISTRIBUTOR, inlet, PTFE | √ |
| 17 | 631232 | SLEEVE, wear, inlet, assembly, PTFE | √ |
| 18 | 940284 | O-RING, silicone, 1.375 x 1.500 x 0.063 in | √ |
| 19 | / | SLEEVE, wear, inlet, PTFE | √ |
| 20 | 940243 | O-RING, silicone, 1.125 x 1.250 x 0.063 in. | √ |
| 21 | 631228 | BODY, autogun, assembly | √ |
| 22 | 630073 | KNOB, M5 x .08 | √ |
| 23 | 630088 | STUD, ground, with nut | √ |
| 24 | 631235 | PIN, quick connect | √ |
Daily Maintenance
1. Remove the powder feed hose from the pump and the air tubing from the pump and diffuser. Use an OSHA-approved air gun to clean the hose, diffuser, and charge module with compressed air.
2. Remove the diffuser from the gun body. Disassemble the diffuser and clean the parts with compressed air and a clean, soft cloth. Check the powder contact parts for wear and replace worn parts.
3. Blow out the charge module and sprayheads. Disassemble and clean the charge module. Check the powder contact parts for wear and replace worn parts.
| NOTE: Never blow powder through the feed hose back into the pump. Turn on the booth exhaust fan, disconnect the hose from the pump, and blow out the hose from the pump end into the booth. |
| WARNING: Make sure the spray gun is grounded before spraying powder or cleaning the spray gun with compressed air. Without a ground connection the spray gun will become electrostatically charged. Personnel touching the spray gun could receive a shock. |
PTFE spraying is a high-performance surface coating commonly used for devices and equipment that require anti-corrosion, wear resistance, high temperature resistance, adhesion resistance, and corrosion prevention. In almost all cases involving high temperature, pressure, chemical corrosion, etc
These materials are commonly used coatings in fields such as chemistry, medicine, food processing, plastic molding, and aerospace due to their excellent inertness, corrosion resistance, wear resistance, and temperature resistance
Q: Can you provide the whole workshop automotive equipment?
A: Yes, we can provide every equipment that needed.
Q: Can I have a visit to your company before placing an order?
A: Sure, welcome to visit us. Our factory locates in Nantong, Jiangsu Province.
Q: Do you offer samples?
A: You can take 1-3 inserts or nozzles in first order for testing.
Q: What kind of support can I get if I am your agent?
A: Bottom price, free catalogs and unique customization for marketing, and on site training.
Q: What's the lead time?
A: The lead time of our products is 2 ~10 days, depending on how many and what kind of equipment you ordered.
Q: What is your payment terms?
A: We can accept T/T, L/C, Paypal, Western union, Moneygram,etc.
Q: How long is the warranty?
A: Our warranty is 12-30 months.
Q: Can I order special color or special size that we need?
A: Yes, the color and size can be customized as client's requests ,but some have quantity requirement.
Q: Can I know how to assemble your spray booth or other equipment?
A: Mostly the complex installation is already finished before delivery, you can easily finish the last according to the installation instructions.And we also can send the assemble vedio to you for your reference.
# Powder coating machine
# Spray gun
# Nordson spare parts
# Nordson manual gun
# Nordson auto gun
Weifang Galin Powder Coating Equipment CO.,LTD
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}